A careful move-in inspection creates a clear record of your apartment’s condition before daily use, furniture, weather, and repairs make changes harder to identify. This reusable move-in inspection checklist explains what to photograph, record, report, and store so you can compare the apartment at move-out and support any legitimate security-deposit discussion.
Overview
Complete your inspection before unpacking as much as possible, ideally on the day you receive the keys or within the period stated in your lease. Bring your lease, any landlord-provided condition report, a phone or camera, a flashlight, a charger, and something to take notes. If the property manager provides a required form, use it; your own photos and notes can supplement it.
Walk through the apartment methodically rather than relying on memory. Record existing wear, damage, dirt, missing items, and anything that does not work. A mark that seems minor at move-in can become difficult to distinguish from later damage, especially after furniture is placed or a repair is completed.
Your documentation is most useful when it is specific, dated, and shared promptly. Local security-deposit laws, condition-report requirements, notice rules, and record-retention expectations vary, so check your lease and the rules that apply where the property is located. This checklist is practical documentation guidance, not a substitute for local legal advice.
Before signing or relying on the inspection record, review the clause-by-clause apartment lease guide and note any instructions about reporting defects, submitting forms, or requesting repairs.
Checklist by scenario
Before you enter the apartment
- Save a copy of the signed lease, addenda, move-in instructions, and any existing condition report.
- Confirm the unit number, inspection date, and the names of everyone completing the inspection.
- Turn on your phone’s date and time settings, and make sure your camera has enough storage and battery.
- Prepare a simple file structure, such as Move-in evidence > Apartment address > Inspection date.
Room-by-room inspection
Take wide photos that show each room’s overall condition, followed by close-ups of individual issues. For every defect, record its location, size or extent where practical, and whether it affects function.
- Entry and halls: Photograph the front door, locks, peephole, intercom, flooring, walls, ceiling, trim, and visible scuffs or dents. Test keys and note missing access devices.
- Living and sleeping areas: Check walls, ceilings, paint, flooring, windows, screens, blinds, outlets, light fixtures, radiators, vents, and built-in storage. Look behind doors and inside closets.
- Kitchen: Photograph counters, cabinets, drawers, backsplash, sink, faucet, drains, appliances, floors, walls, and signs of leaks or staining. Test appliances only as permitted and record whether each operates.
- Bathroom: Inspect the toilet, tub or shower, grout, caulk, vanity, mirror, exhaust fan, outlets, floor, ceiling, and visible plumbing. Note slow drainage, water marks, loose fixtures, or signs of moisture.
- Utilities and safety items: Locate the electrical panel, water shutoff, heating and cooling controls, smoke alarms, carbon monoxide alarms where applicable, and fire extinguishers if supplied. Do not remove safety devices; record visible condition and report concerns.
- Outdoor and shared areas: If included with the rental, document balconies, patios, storage areas, parking spaces, mailboxes, and any furnishings or equipment assigned to you.
Photo and video workflow
Use a continuous video walkthrough if helpful, but do not rely on video alone. Narrate the room and issue as you record, then take still photos of important damage. Include a wider image that establishes location and a closer image that shows detail. Place a ruler or familiar object next to a mark only if doing so does not disturb anything.
Use consistent filenames, such as 2026-11-05_kitchen_cabinet-left-door-scratch.jpg or 2026-11-05_bathroom-sink-leak-video.mp4. Keep original files rather than relying only on edited or compressed copies. Back them up to a second secure location.
After the walkthrough
- Complete the condition report in plain, specific language. Write “three dark scuffs on the wall beside the bedroom door,” not simply “wall damaged.”
- List items that are missing, broken, dirty, stained, or unsafe, even if you expect the landlord to repair them.
- Send the report and relevant photos to the landlord or property manager through the method required by the lease.
- Ask for written confirmation that the submission was received, and keep the sent message and attachments.
- Submit repair requests separately when an issue affects habitability, security, plumbing, heating, electrical systems, or another essential function.
For a repair issue that continues after move-in, use the apartment maintenance request and documentation guide to keep a dated communication trail.
What to double-check
Before you finish, compare your notes with the lease, inventory list, and any promised repairs. Look specifically for details that are easy to overlook:
- Are all keys, remotes, access cards, and mailbox keys accounted for?
- Do the names and unit details match across the lease, condition report, and submission email?
- Have you documented stains, nail holes, cracked tiles, damaged blinds, chipped paint, worn flooring, and appliance marks rather than describing them generally?
- Did you check inside cabinets, closets, drawers, under sinks, behind doors, and around windows?
- Have you recorded meter readings or appliance serial numbers if the lease or local process calls for them?
- Are there signs of water intrusion, pests, mold-like growth, unusual odors, broken locks, exposed wiring, or other conditions that require prompt notice?
- Does your photo set include both the issue and its location in the apartment?
- Did you preserve the original timestamped files and create a backup?
Do not assume that a landlord’s verbal promise to fix an item replaces written documentation. Note what was promised, by whom, and when. If a repair is completed, photograph the result and retain the related messages. The same process can be used for damage that occurs later: record it promptly, report it through the approved channel, and keep copies of all responses.
Common mistakes
- Waiting until the apartment is unpacked: Furniture and boxes can hide floors, walls, outlets, and baseboards. Inspect first whenever possible.
- Taking only wide photos: A room photo may not prove the size or location of a specific scratch, stain, or crack. Pair wide and close images.
- Using vague descriptions: “Bad condition” is less useful than a location, description, and functional impact.
- Failing to submit the record: Photos kept privately may be less useful than a dated report sent through the lease-approved process.
- Editing or deleting originals: Filters, cropped images, and missing metadata can weaken the timeline. Preserve originals and create separate copies for annotations.
- Ignoring safety or urgent conditions: A move-in checklist is not a reason to delay reporting a serious leak, lock problem, electrical hazard, or loss of an essential service.
- Mixing units or dates: Shared folders and generic filenames can create confusion. Label every file with the date, room, and issue.
For future renters, the apartment viewing checklist covers what to examine before signing, while this inspection focuses on the condition you accept after approval.
When to revisit
Keep the move-in record for the entire tenancy and for as long as your local rules, lease, or an unresolved dispute make it relevant. Revisit it at four practical points:
- After repairs: Photograph the completed work and save the work-order or message with your original report.
- After accidental damage: Record what happened, prevent further damage when reasonable, and notify the landlord promptly according to the lease.
- At lease renewal: Compare the apartment’s current condition with the original record and review any updated reporting, deposit, or inspection language.
- Before move-out: Use the original photos and room-by-room notes to clean, repair tenant-caused damage where appropriate, remove belongings, and document the final condition.
When local tenancy rules or your lease change, confirm whether the required condition-report format, delivery method, notice period, or record-retention practice has changed. Recheck this workflow before seasonal moves and whenever your storage, photo, or communication tools change. For related lease and deposit preparation, review the lease renewal checklist and keep all records together until the tenancy and any deposit accounting are fully resolved.
Action step: Create the inspection folder before receiving the keys, complete the walkthrough before unpacking, send the condition report promptly, and set a calendar reminder to repeat the comparison before move-out.